Подскажите как зайти в биос на нотебуке TOSHIBA

[JEwKA]

Ноут класса Пень
Если быть точнее - 440CDT

Заранее благодарен

[tox]

Эх давно это было... Попробуй F1, F2 и т.д. Если не изменяет память то одна из них.

[JEwKA]

Эх давно это было... Попробуй F1, F2 и т.д. Если не изменяет память то одна из них.

Чего-то не получается :(
HELP!

[boav]

When the TOSHIBA splash screen is displayed when you first turn on your computer, a boot menu prompt may be displayed for a few seconds near the bottom of the screen, indicating that a key (F2 or F12, for example) can be pressed to display a menu of boot options. The time allowed for detecting the keypress is very brief, so you'll need to be both prepared and quick.

On some models this prompt reads Press F12 for boot menu. On others, it may say Press C to boot from CD-ROM. On still others, there may be a row of colored icons representing the various boot devices (HDD, FDD, CD, LAN, PCMCIA, etc.) Press F12 while these icons are displayed, and then use the arrow keys to move the cursor from one to another. As new models are released, the wording of these prompts may change.

On models that offer a text boot device menu, simply press the key corresponding to the desired boot device from the list of available devices.

The selection of a boot device from any of these boot device menus affects only the current startup operation; the next time the computer is started it will follow the boot priority setting established in BIOS Setup (see the BIOS Setup method, above).

источник http://www.csd.toshiba.com/cgi-bin/t...ngdgnj.0&ct=SB


дополнение
You can access the BIOS settings on these models using any one of these 3 methods.
From the Windows Control Panel, launch the Toshiba HWSetup program. HWSetup provides a user-friendly graphical frontend for modifying BIOS settings. Please note that if you change some settings, you may be required to restart your computer. HWSetup comes preinstalled on your Toshiba portable PC, or it can be downloaded as part of the Toshiba Utilities package for your model.

Press the [Esc] key while the system processes its Power On Self Test (POST). In order to use this method, the computer must be "off", meaning not in sleep/suspend or hibernate mode. Press the power button, then immediately press the [Esc] key (it doesn't hurt to hold the key down). When the POST finishes, you'll be prompted to press the F1 key to enter BIOS setup. Press the [F1] key to access the BIOS setup program.

From MS-DOS, run the TSETUP program. TSETUP must be run under real mode DOS (not a Windows-based MS-DOS prompt) with no memory manager (like HIMEM.SYS, QEMM386, or equivalent) installed. TSETUP was provided originally with your computer, or you can download it from this Website

http://www.csd.toshiba.com/cgi-bin/t...ngdgnj.0&ct=SB

[JEwKA]

When the TOSHIBA splash screen is displayed when you first turn on your computer, a boot menu prompt may be displayed for a few seconds near the bottom of the screen, indicating that a key (F2 or F12, for example) can be pressed to display a menu of boot options. The time allowed for detecting the keypress is very brief, so you'll need to be both prepared and quick.

On some models this prompt reads Press F12 for boot menu. On others, it may say Press C to boot from CD-ROM. On still others, there may be a row of colored icons representing the various boot devices (HDD, FDD, CD, LAN, PCMCIA, etc.) Press F12 while these icons are displayed, and then use the arrow keys to move the cursor from one to another. As new models are released, the wording of these prompts may change.

On models that offer a text boot device menu, simply press the key corresponding to the desired boot device from the list of available devices.

The selection of a boot device from any of these boot device menus affects only the current startup operation; the next time the computer is started it will follow the boot priority setting established in BIOS Setup (see the BIOS Setup method, above).

источник http://www.csd.toshiba.com/cgi-bin/t...ngdgnj.0&ct=SB

Э ... насколько я понял тут речь идет о быстрых способах альтернативной загрузки, мне же надо просто зайти в БИОС.
Люди ХЕЛП!

[JEwKA]

дополнение
You can access the BIOS settings on these models using any one of these 3 methods.
From the Windows Control Panel, launch the Toshiba HWSetup program. HWSetup provides a user-friendly graphical frontend for modifying BIOS settings. Please note that if you change some settings, you may be required to restart your computer. HWSetup comes preinstalled on your Toshiba portable PC, or it can be downloaded as part of the Toshiba Utilities package for your model.

Press the [Esc] key while the system processes its Power On Self Test (POST). In order to use this method, the computer must be "off", meaning not in sleep/suspend or hibernate mode. Press the power button, then immediately press the [Esc] key (it doesn't hurt to hold the key down). When the POST finishes, you'll be prompted to press the F1 key to enter BIOS setup. Press the [F1] key to access the BIOS setup program.

From MS-DOS, run the TSETUP program. TSETUP must be run under real mode DOS (not a Windows-based MS-DOS prompt) with no memory manager (like HIMEM.SYS, QEMM386, or equivalent) installed. TSETUP was provided originally with your computer, or you can download it from this Website

http://www.csd.toshiba.com/cgi-bin/t...ngdgnj.0&ct=SB

Вооо...
Спасибочки огромное, по данному описанию получилось!
Еще раз Спасибо!!!

[boav]

кто ищет тот найдет :D